kettle tippers

A coated wire cradle which is suitable for most kettle types, including standard, jug and electric kettles. It has a raised wire frame to hold the kettle and assist with pouring, and rubber feet to prevent the tipper sliding on the work surface. For added safety, the tipper has a back stop, preventing spillage if the kettle is released during usage. Straps are provided to attach the kettle to the tipper.

This tipper allows the safe and steady pouring of hot liquids without lifting any weight. It is suitable for most types of teapot or electric kettle and comes with a Velcro brand hook and loop strap for added security. Made completely from plastic it is lightweight and corrosion resistant. Suitable for use with cordless kettles. Length 205mm (8"). Width 275mm (11").
Height 200mm (8"). Weight 500g. When using the tipper with a cordless kettle (especially a jug kettle) for additional safety, it is recommended that the Tipper Stabiliser Base is used.

This new and innovative kettle tipper is designed to be compatible with most kettle types including standard, jug and cordless kettles. The lever can be positioned on either side of the tipper to tip the kettle while it is held in place, without the user having to actually lift the water. This reduces the effort required and potential strain on the wrist that can occur when holding the kettle handle. For added safety the kettle will rock back into the upright position if the user lets go during use. The base plate is 200mm in diameter and has a sliding stop at the front so that the kettle can be positioned in the most suitable position. It is then secured in place by the two sturdy straps. The tipper is manufactured from attractive heat resistant plastic for durability and has rubber feet to prevent sliding on the work surface.

A coated wire cradle that holds most styles of jug kettle, and pivots on a raised wire frame by gentle pressure on the handle to assist with pouring. The kettle sits in the cradle and is secured by an elasticated strap. The frame has a built in stop for positioning the mug and a back stop to prevent spillage if the kettle is accidentally released during pouring. The frame has non-slip feet.
Not suitable for cordless or mini jug kettles. Weight 602g.


A raised tilting platform, designed to assist with pouring from
any standard kettle with virtually no effort or risk of spilling
boiling water. When the handle is pushed gently forward,
the platform pivots on its white coated wire frame, which has non-slip feet. It cannot drop forward accidentally or fall back
past the horizontal. The frame is high enough to pour safely
into a teapot, mug or cup. Not suitable for cordless kettles. Platform height 93mm (35/8"). Weight 1kg.

This innovative kettle tipper will suit most cordless kettles.
There is a metal plate that secures the base of the cordless kettle and a frame with a hook and loop strap to keep the upper part of the kettle in place. A cut out at the foot of the tipper allows cups to be positioned as close to the kettle as required. The frame has a built in back stop to prevent spillage if the kettle is accidentally released during use. Weight 1kg.